Clearing Tacacs+ Statistics On The Gss; Disabling Tacacs+ On A Gss - Cisco GSS-4492R-K9 Administration Manual

Clearing TACACS+ Statistics on the GSS

Clearing TACACS+ Statistics on the GSS

Disabling TACACS+ on a GSS

Cisco Global Site Selector Administration Guide
4-28
Table 4-2 Field Descriptions for show statistics tacacs Command (continued)
Field
Fail
Error
You can clear the current TACACS+ statistics by using clear statistics tacacs
command. Clearing the statistics for a GSS erases all TACACS+ activity and
performance records for that device.
For example, enter:
gss1.example.com# clear statistics tacacs
Are you sure? (yes/no) yes
As a GSS administrator, if you accidentally lock yourself out of a GSS device and
are unable to receive TACACS+ user authentication or authorization to access that
device, you can disable the TACACS+ function on that GSS from the CLI. You
must have physical access to the GSS device to perform this procedure.
To disable TACACS+ on a GSS device, perform the following steps:
Attach an ASCII terminal to the console port on the GSS device. See the
1.
Cisco Global Site Selector Hardware Installation Guide for instructions on
connecting a console cable to your Cisco Global Site Selector series
hardware.
Press the power control button on the GSS to power cycle the device and
2.
perform a restart. As the GSS reboots, the output appears on the console
terminal.
Chapter 4 Managing GSS User Accounts Through a TACACS+ Server
Description
Counter that increments when a deny condition
occurs as the result of an authentication,
authorization, or accounting service.
Counter that increments as the result of a
communications failure with the TACACS+ server, a
TACACS+ protocol error, or an internal error that
prevented the session from completing.
OL-10410-01