Displaying Cluster Status For A Master Blade - Cisco TelePresence Server 7010 Product User Manual

Displaying cluster status for a master blade

To display cluster status, go to
Cluster status is only available for blades that are configured on the Cisco TelePresence Supervisor
MSE 8050 to be part of a cluster. For more information about clustering, refer to
clustering.
The table below describes the
details about slave blades, see
Note: The Conference controlling arrangement is not the same as the clustering arrangement of multiple
TelePresence Servers. For more information, see
Field Field description
Slot The number of the slot in the Cisco TelePresence
MSE 8000 chassis that corresponds to this row in the
table.
IP The IP address of the blade in this slot, or Master
blade (if this is the master).
Cisco TelePresence Server Product User Guide
Status > Cluster.
Status > Cluster page that displays for the master blade in a cluster. For
Displaying cluster status for a slave
Comparing clustering with Conference
Cluster status
System status
Understanding
blade.
controlling.
Usage tips
To configure a blade as a master or a
slave in a cluster, log in to the
Supervisor.
Page 10 of 151