Activating And Modifying Gss Devices; Activating Gss Devices From The Primary Gssm - Cisco GSS-4492R-K9 Administration Manual

Activating and Modifying GSS Devices

Activating and Modifying GSS Devices

Activating GSS Devices from the Primary GSSM

Cisco Global Site Selector Administration Guide
1-6
At the Network Registrar login window, enter your username and password
3.
in the fields provided, and then click Login.
See the Cisco CNS Network Registrar User's Guide for information on
configuring CNR using its Web-based user interface (Web UI).
Activate your GSS devices from the primary GSSM GUI to add those devices to
your GSS network. You also use the primary GSSM GUI to remove a
non-functioning standby GSSM or GSS device from your network.
This section contains the following procedures:
Activating GSS Devices from the Primary GSSM
•
• Modifying GSS Device Name and Location
Deleting GSS Devices
•
After you configure your GSS devices from the CLI to function as a standby
GSSM or as a GSS, activate those devices from the primary GSSM GUI so they
can receive and process user requests.
To activate a GSS or a standby GSSM from the primary GSSM GUI, perform the
following steps:
Click the Resources tab.
1.
2. Click the Global Site Selectors navigation link. The Global Site Selectors list
page appears (see
"Online" status. The GSS devices requiring activation appear with an
"Inactive" status.
Chapter 1
Figure 1-4). All active GSS devices appear with an
Managing GSS Devices from the GUI
OL-10410-01