Arp Address List Information; Ospf Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

ARP address list information

The following command displays ARP address list information:
show ip arp reply
Command mode: All except User EXEC
IP address
--------------- ---------------
205.178.18.66
205.178.50.1
205.178.18.64
This screen displays all entries in the ARP cache.

OSPF information

NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the OSPF commands.
Table 32 OSPF information commands
Command
show ip ospf general-information
show ip ospf area information [<0-2>]
show ip ospf interface [<1-256>]
show ip ospf area-virtual-link
information
show ip ospf neighbor
show ip ospf summary-range <0-2>
show ip ospf summary-range-nssa <0-2>
show ip ospf routes
show ip ospf information
IP mask MAC address
----------------- ---- -----
255.255.255.255 00:70:cf:03:20:04
255.255.255.255 00:70:cf:03:20:06
255.255.255.255 00:70:cf:03:20:05
Usage
Displays general OSPF information.
Command mode: All except User EXEC
Displays area information for a particular area index. If no
parameter is supplied, it displays area information for all the
areas.
Command mode: All except User EXEC
Displays interface information for a particular interface. If no
parameter is supplied, it displays information for all the
interfaces.
Command mode: All except User EXEC
Displays information about all the configured virtual links.
Command mode: All except User EXEC
Displays the status of all the current neighbors.
Command mode: All except User EXEC
Displays the list of summary ranges belonging to non-NSSA
areas.
Command mode: All except User EXEC
Displays the list of summary ranges belonging to NSSA areas.
Command mode: All except User EXEC
Displays OSPF routing table.
Command mode: All except User EXEC
Displays the OSPF information.
Command mode: All except User EXEC
VLAN Flags
P
1
1
Information Commands 41