Statistics Commands; Introduction; Port Statistics - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

Statistics commands

Introduction

You can view switch performance statistics in the user, operator, and administrator command modes. This chapter
discusses how to use the ISCLI to display switch statistics.
The following table describes general Statistics commands.
Table 43 Statistics commands
Command
show layer2 counters
show layer3 counters
NOTE: Layer 3 commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
show snmp-server counters
show ntp counters
clear ntp
show ufd counters
show counters

Port Statistics

The following table describes the Port Statistics commands. The following sections provide more detailed information
and commands.
Table 44 Port Statistics commands
Command
show interface port <port number>
dot1x counters
show interface port <port number>
bridging-counters
show interface port <port number>
ethernet-counters
show interface port <port number>
interface-counters
show interface port <port number>
ip-counters
show interface port <port number>
link-counters
Usage
Displays Layer 2 Statistics.
Command mode: All
Displays Layer 3 Statistics.
Command mode: All
Displays SNMP statistics.
Command mode: All
Displays Network Time Protocol (NTP) Statistics.
You can execute the clear command option to delete all statistics.
Command mode: All
Clears Network Time Protocol (NTP) Statistics.
Command mode: All
Displays Uplink Failure Detection statistics.
Command mode: All
Dumps all switch statistics. Use this command to gather data for
tuning and debugging switch performance. If you want to capture
dump data to a file, set your communication software on your
workstation to capture session data prior to issuing the dump
command.
Command mode: All
Usage
Displays IEEE 802.1x statistics for the port.
Command mode: All
Displays bridging ("dot1") statistics for the port.
Command mode: All
Displays Ethernet ("dot3") statistics for the port.
Command mode: All
Displays interface statistics for the port.
Command mode: All
Displays Internet Protocol statistics for the port.
Command mode: All
Displays link statistics for the port.
Command mode: All
Statistics commands 55