Ospf General Information; Ospf Interface Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

OSPF general information

NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following command displays general OSPF information:
show ip ospf general-information
Command mode: All except User EXEC
OSPF Version 2
Router ID: 10.10.10.1
Started at 1663 and the process uptime is 4626
Area Border Router: yes, AS Boundary Router: no
LS types supported are 6
External LSA count 0
External LSA checksum sum 0x0
Number of interfaces in this router is 2
Number of virtual links in this router is 1
16 new lsa received and 34 lsa originated from this router
Total number of entries in the LSDB 10
Database checksum sum 0x0
Total neighbors are 1, of which
Number of areas is 2, of which 3-transit 0-nssa

OSPF interface information

NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following command displays OSPF interface information:
show ip ospf interface [<1-256>]
Command mode: All except User EXEC
Ip Address 10.10.12.1, Area 0.0.0.1, Admin Status UP
Router ID 10.10.10.1, State DR, Priority 1
Designated Router (ID) 10.10.10.1, Ip Address 10.10.12.1
Backup Designated Router (ID) 10.10.14.1, Ip Address 10.10.12.2
Timer intervals, Hello 10, Dead 40, Wait 1663, Retransmit 5,
Transit delay 1
Neighbor count is 1 If Events 4, Authentication type none
Area Id : 0.0.0.0
Authentication : none
Import ASExtern : yes
Number of times SPF ran : 8
Area Border Router count : 2
AS Boundary Router count : 0
LSA count : 5
LSA Checksum sum : 0x2237B
Summary : noSummary
2 are >=INIT state,
2 are >=EXCH state,
2 are =FULL state
Information Commands 42