4. To continue deleting the selected Member, press the Space bar once to
select Yes for the prompt, then press
Stack Management screen updates to show the new stack Member list.
Using the Commander To Access Member Switches for
Configuration Changes and Monitoring Traffic
After a Candidate becomes a stack Member, you can use that stack's
Commander to access the Member's console interface for the same configu
ration and monitoring that you would do through a Telnet or direct-connect
access.
1.
From the Main Menu, select:
9. Stacking...
5. Stack Access
You will then see the Stack Access screen:
Figure 15-16. Example of the Stack Access Screen
Use the downarrow key to select the stack Member you want to access, then
(for eXecute) to display the console interface for the selected Member.
press
[X]
For example, if you selected switch number 1 (system name:
15-16 and then pressed
Coral Sea.
[Enter]
For status descriptions, see the table on page 15-46.
[X]
, you would see the Main Menu for the switch named
HP ProCurve Stack Management
Configuring Stack Management
to complete the deletion. The
Coral Sea
) in figure
15-23