Port Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

Port configuration

Use the port configuration commands to configure settings for individual switch ports.
NOTE: Port 19 is reserved for switch management.
The following table describes the Port Configuration commands. The following sections provide more detailed
information and commands.
Table 96 Port Configuration commands
Command
interface port {<port
number>}
dot1p <0-7>
pvid {<1-4095>}
NOTE: VLAN 4095 is reserved for switch management.
name {<1-64 characters>}
[no] rmon
[no] tagging
[no] tag-pvid
copper
fiber
auto-mode
broadcast-threshold {<0-
262143>}
multicast-threshold {<0-
262143>}
dest-lookup-threshold {<0-
262143>}
no shutdown
Description
Enter Interface Port configuration mode for the selected port.
Command mode: Global configuration
Configures the port's 802.1p priority level.
Command mode: Interface port
Sets the default VLAN number which will be used to forward frames which are
not VLAN tagged. The default number is 1.
Command mode: Interface port
Sets a name for the port (maximum 64 characters). The assigned port name
displays next to the port number on some information and statistics screens.
Command mode: Interface port
Enables or disables Remote Monitoring for the port. RMON must be enabled
for any RMON configurations to function.
Command mode: Interface port
Disables or enables VLAN tagging for this port. It is disabled by default.
Command mode: Interface port
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is
removed from packets whose VLAN tag matches the port PVID. The default
value is enabled.
Command mode: Interface port
Configures the port's transmission media as
available only for uplink ports.
This command is available only on the GbE2c Layer 2/3 Ethernet Blade
Switch.
Configures the port's transmission media as
available only for uplink ports.
This command is available only on the GbE2c Layer 2/3 Ethernet Blade
Switch.
Configures the port's transmission media as
only for uplink ports.
This command is available only on the GbE2c Layer 2/3 Ethernet Blade
Switch.
Limits the number of broadcast packets per second to the specified value. If
disabled ( ), the port forwards all broadcast packets.
dis
Command mode: Interface port
Limits the number of multicast packets per second to the specified value. If
disabled ( ), the port forwards all multicast packets.
dis
Command mode: Interface port
Limits the number of unknown unicast packets per second to the specified
value. If disabled ( ), the port forwards all unknown unicast packets.
dis
Command mode: Interface port
Enables the port.
Command mode: Interface port
. This command is
copper
. This command is
fiber
. This command is available
auto
Configuration Commands 96