Snmpv3 Target Address Table Information; Snmpv3 Target Parameters Table Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

SNMPv3 Target Address Table information

The following command displays SNMPv3 target address information:
show snmp-server v3 target-address
Command mode: All
Name
---------- --------------- ---- ---------- ---------------
trap1
This command displays the SNMPv3 target address table information, which is stored in the SNMP engine.
The following table describes the SNMPv3 Target Address Table information.
Table 13 Target Address Table information
Field
Name
Transport Addr
Port
Taglist
Params

SNMPv3 Target Parameters Table information

The following command displays SNMPv3 target parameters information:
show snmp-server v3 target-parameters
Command mode: All
Name
------------------- -------- -------------------- --------- -----------
v1v2param
The following table describes the SNMPv3 Target Parameters Table information.
Table 14 Target Parameters Table information
Field
Name
MP Model
User Name
Sec Model
Sec Level
Transport Addr Port Taglist
47.81.25.66 162
Description
Displays the locally arbitrary, but unique identifier associated with this snmpTargetAddrEntry.
Displays the transport addresses.
Displays the SNMP UDP port number.
This column contains a list of tag values which are used to select target addresses for a
particular SNMP message.
The value of this object identifies an entry in the snmpTargetParamsTable. The identified entry
contains SNMP parameters to be used when generating messages to be sent to this transport
address.
MP Model User Name
snmpv2c
Description
Displays the locally arbitrary, but unique identifier associated with this snmpTargeParamsEntry.
Displays the Message Processing Model used when generating SNMP messages using this entry.
Displays the securityName, which identifies the entry on whose behalf SNMP messages will be
generated using this entry.
Displays the security model used when generating SNMP messages using this entry. The system may
choose to return an inconsistentValue error if an attempt is made to set this variable to a value for a
security model which the system does not support.
Displays the level of security used when generating SNMP messages using this entry.
Params
v1v2trap v1v2param
v1v2only
Sec Model Sec Level
snmpv1 noAuthNoPriv
Information Commands 21