Layer 2 Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

The following table describes the User Name information.
Table 16 User Name Information
Field
user
oper
admin
Current User ID Table

Layer 2 information

The following table describes the Layer 2 Information commands. The following sections provide more detailed
information and commands.
Table 17 Layer 2 information commands
Command
show mac-address-table
show lacp information
show qos transmit-queue information
show dot1x information
show spanning-tree stp <1-128>
information
show spanning-tree mstp cist information
show portchannel information
Usage
Displays the status of the
user
Displays the status of the
oper
Displays the status of the
admin
Displays the status of configured user IDs. To configure new user IDs, use the
/cfg/sys/access/user/uid
Usage
Displays Forwarding Database Information.
Command mode: All
Displays a summary of LACP information.
Command mode: All
Displays 802.1p Information.
Command mode: All
Displays 802.1x Information.
Command mode: All
n addition to seeing if STP is enabled or disabled, you can
I
view the following STP bridge information:
Priority
Hello interval
Maximum age value
Forwarding delay
Aging time
You can also refer to the following port-specific STP
information:
Port number and priority
Cost
State
Command mode: All
Displays Common internal Spanning Tree (CIST) bridge
information, including the following:
Priority
Hello interval
Maximum age value
Forwarding delay
You can also view port-specific CIST information, including
the following:
Port number and priority
Cost
State
Command mode: All
When trunk groups are configured, you can view the state of
each port in the various trunk groups.
Command mode: All
access level.
(operator) access level.
(administrator) access level.
command.
Information Commands 26