Figure 52. Filling Groove With Adhesive; Figure 53. Application Of Accelerant - Intel QX9770 - Core 2 Extreme Quad-Core Processor Design Manual

Intel core 2 extreme processor qx6800 and intel core 2 extreme processor qx9770 thermal and mechanical design guidelines

Table of Contents

Case Temperature Reference Metrology

31. Fill the rest of the groove with Loctite* 498 Adhesive. Verify under the microscope

that the thermocouple wire is below the surface along the entire length of the IHS

groove (Figure 52).

Figure 52. Filling Groove with Adhesive

32. To speed up the curing process apply Loctite* Accelerator on top of the Adhesive

and let it set for a couple of minutes(Figure 53).

Thermal and Mechanical Design Guidelines

Table of Contents

Do you have a question about the QX9770 - Core 2 Extreme Quad-Core Processor and is the answer not in the manual?

Qx68000 core 2 extreme