Figure 50. Thermocouple Placed Into Groove; Figure 51. Removing Excess Solder - Intel QX9770 - Core 2 Extreme Quad-Core Processor Design Manual

Intel core 2 extreme processor qx6800 and intel core 2 extreme processor qx9770 thermal and mechanical design guidelines

Table of Contents

Figure 50. Thermocouple placed into groove

29. Using a blade carefully shave the excess solder above the IHS surface. Only shave

in one direction until solder is flush with the groove surface (Figure 51).

Note: Take usual precautions when using open blades

30. Clean the surface of the IHS with Alcohol and use compressed air to remove any

remaining contaminants.

Case Temperature Reference Metrology

Thermal and Mechanical Design Guidelines

Table of Contents

Do you have a question about the QX9770 - Core 2 Extreme Quad-Core Processor and is the answer not in the manual?

Qx68000 core 2 extreme