Figure 43. Applying Flux To The Thermocouple Bead; Figure 44. Cutting Solder - Intel QX9770 - Core 2 Extreme Quad-Core Processor Design Manual

Intel core 2 extreme processor qx6800 and intel core 2 extreme processor qx9770 thermal and mechanical design guidelines

Table of Contents

Case Temperature Reference Metrology

14. Using a fine point device, place a small amount of flux on the thermocouple bead.

Be careful not to move the thermocouple bead during this step (Figure 43). Ensure

the flux remains in the bead area only.

Figure 43. Applying Flux to the Thermocouple Bead

15. Cut two small pieces of solder 1/16 inch (0.065 inch / 1.5 mm) from the roll using

tweezers to hold the solder while cutting with a fine blade(Figure 44)

Thermal and Mechanical Design Guidelines

Table of Contents

Do you have a question about the QX9770 - Core 2 Extreme Quad-Core Processor and is the answer not in the manual?

Qx68000 core 2 extreme