Figure 39. Position Bead On The Groove Step; Figure 44. Detailed Thermocouple Bead Placement - Intel QX9770 - Core 2 Extreme Quad-Core Processor Design Manual

Intel core 2 extreme processor qx6800 and intel core 2 extreme processor qx9770 thermal and mechanical design guidelines

Table of Contents

Case Temperature Reference Metrology

11. While still at the microscope, press the wire down about 6mm [0.125"] from the

thermocouple bead using the tweezers or your finger. Place a piece of Kapton*

tape to hold the wire inside the groove (Figure 39). Refer to Figure 40 for detailed

bead placement.

Figure 39. Position Bead on the Groove Step

Kapton* tape

Figure 40. Detailed Thermocouple Bead Placement

Thermal and Mechanical Design Guidelines

TC Wire with Insulation

IHS with Groove

Wire section

into the

groove to

prepare for

final bead

placement

TC Bead

Table of Contents

Qx68000 core 2 extreme