Figure 47. View Through Lens At Solder Station; Figure 48. Moving Solder Back Onto Thermocouple Bead - Intel QX9770 - Core 2 Extreme Quad-Core Processor Design Manual

Intel core 2 extreme processor qx6800 and intel core 2 extreme processor qx9770 thermal and mechanical design guidelines

Table of Contents

24. You may need to move the solder back toward the groove as the IHS begins to

heat. Use a fine tip tweezers to push the solder into the end of the groove until a

solder ball is built up (Figure 47 and Figure 48)

Figure 47. View Through Lens at Solder Station

Case Temperature Reference Metrology

Thermal and Mechanical Design Guidelines

Table of Contents

Do you have a question about the QX9770 - Core 2 Extreme Quad-Core Processor and is the answer not in the manual?

Qx68000 core 2 extreme