Basic Operation; Basic Copying Procedure - Kyocera Ai2310 Instruction Handbook Manual

BASIC OPERATION

Basic copying procedure

1 1
1. Turn the main switch ON ( ).
5 5
5. Paper size selection
When "APS" appears on the display selection, paper of the same size
as the original is automatically selected. To copy the original's image
onto a different size paper without changing the size of the image,
press the Paper Select key for the desired size of paper, and press the
Manual key. To make copies of the same size as the originals with
images of the same size, no special settings are required.
* Automatic paper selection can also be turned off. (See "8 Paper
selection" on page 115.)
* A drawer (paper feed drawer) to be selected automatically can be
specified without setting any originals. (See "9 Default drawer" on
page 115.)
8 8
8. Setting the number of copies
Use the numeric keys to enter the desired number of copies on the
message display. Up to 999 copies can be set.
* It is possible to lower the limit on the number of copies that can be set
at a time. (See "! Copy limit" on page 116.)
35
2 2
2. Warm-up
At the end of warm-up, "Ready to copy." will appear on the message
display.
* If originals are set and the Start key is pressed while the copier is still
warming up, copying will begin as soon as warm-up ends.
6 6
- - 1 1
6. Copy exposure adjustment
In the initial mode, manual exposure is the default exposure mode. One
of the Copy exposure indicators will be lit. By moving the cursor on the
exposure scale to the right, copies become darker. By moving it to the
left, copies become lighter.
* Exposure adjustment is selected from 7 or 13 levels.
(See "2 Exposure step" on page 114.)
9 9
9. Starting copying
Press the Start key. If "Ready to copy." is displayed on the message
display, copying is possible.