When Paper Misfeeds; Misfeed Location Indicators; Cautions; Lorsque Le Papier Est Bloque - Kyocera Ai2310 Instruction Handbook Manual

3010/2310 instruction handbook
Hide thumbs Also See for Ai2310:
Table of Contents

Advertisement

WHEN PAPER MISFEEDS

LORSQUE LE PAPIER EST BLOQUE

CUANDO SE PRODUCE UN ATASCO DEL PAPEL

If a paper misfeed occurs, copying will stop. A misfeed message will
appear on the operation panel and misfeed locations will be indicated
there also. Remove the misfed paper referring "(3) Removal
procedures" on page 143, with the main switch in the ON ( | )
position.

(1) Misfeed location indicators

1 Misfeed in paper feed section (page 143)
2 Misfeed in the left 1 cover (page 148)
3 Misfeed in DF <optional> (page 151)
4 Misfeed in finisher <optional> (page 152)
5 Misfeed in mail box <optional> (page 152)
141
5
4
1

(2) Cautions

WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is a
danger of electrical shock.
CAUTION
The copier's fixing unit is extremely hot. Take sufficient
care when working in this area, as there is a danger of
getting burned.
* Do not reuse misfed paper.
* If paper gets torn during removal, be sure to remove any loose
scraps from inside the copier, or they could cause misfeeds later.
* After misfed paper has been removed, warm-up will begin, the
misfeed message will disappear, and the copier will return to the
same settings prior to the misfeed.
* Even if a misfeed occurs in the finisher or mail box, do not put the
misfed copy into the tray, as it will be automatically copied again.
3
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ai301030102310

Table of Contents