Overview of Configuring and Installing Cisco Unified IP Phones
Checklist for Installing the Cisco Unified IP Phone 7931G
Table 1-8
The list presents a suggested order to guide you through the phone installation. Some tasks are optional,
depending on your system and user needs. For detailed procedures and information, refer to the sources
in the list.
Table 1-8
Checklist for Installing the Cisco Unified IP Phones 7931G
Task and Purpose
1.
Choose the power source for the phone:
Power over Ethernet (PoE)
•
External power supply
•
Determines how the phone receives power.
Assemble the phone, adjust phone placement, and connect the network cable.
2.
Locates and installs the phone in the network.
Monitor the phone startup process.
3.
Verifies that phone is configured properly.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
1-24
provides an overview and checklist of installation tasks for the Cisco Unified IP Phone 7931G.
Chapter 1
An Overview of the Cisco Unified IP Phone
For More Information
See
Providing Power to the
Phone, page
2-3.
See
Installing the Cisco Unified
IP Phone, page
3-5.
See
Securing the Phone with a
Cable Lock, page
See
Verifying the Phone Startup
Process, page
3-8.
3-7.
OL-20798-01