Basic Setup; Spa9000 Interface - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA400 Field Reference
Setup
SPA9000 Voice System Administration Guide
Setup tab>

Basic Setup

Network Setup
Dynamic IP Address
(DHCP Client)
Fixed IP Address
IP Subnet Mask
Gateway IP Address
Domain Name Server (DNS) Address
Primary DNS
Secondary DNS
NTP
NTP Server 1
Time Zone
Syslog Server
Setup tab>

SPA9000 Interface

SPA9000 User ID
User ID
Select this button to obtain an IP address through DHCP.
Fixed IP address is the recommended setting.
Default setting: Dynamic IP Address
Select this button to assign a static IP address to the SPA400.
This is the recommended configuration.
Subnet mask
IP address of the Gateway/Router
IP address of the primary domain name server
IP address of the secondary domain name server
IP address or FQDN of a NTP server
Select the time zone
The IP address of the syslog server to which the SPA9000
sends syslog messages. Leave blank if you do not want to
receive syslog messages.
The User ID of the SPA9000
This value must be identical to the User ID that is entered on
the SPA9000 line interface page for this SPA400 device.
C
262