Upgrading The Firmware For The Spa400 - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Administering the SPA400 and Voice Mail Service

Upgrading the Firmware for the SPA400

Upgrading the Firmware for the SPA400
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
SPA9000 Voice System Administration Guide
Reboot OK
d. When the
for 60 seconds (the time required for the SPA9000 to re-register with SPA400).
As needed, you can download new firmware and then install it on the SPA400.
Download the latest SPA400 firmware from the following URL:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=282414117
Connect to the SPA400 administration web server. (See
SPA400 Administration Web Server," on
Click Administration tab > Firmware Upgrade.
Click Browse.
SPA400 Administration tab > Firmware Upgrade page
Find the binary (.bin file) that you extracted to your Desktop, and click Open. The
selected file appears in the
Click Upgrade.
. Go to Setup page? message appears, click OK and wait
page103.)
File Path
field on the
"Connecting to the
Firmware Upgrade
page.
5
107