Usb Setting; Firmware Upgrade; Reboot - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA400 Field Reference
Administration
SPA9000 Voice System Administration Guide
Administration tab>

USB Setting

USB status
I want to reset USB
(check box)
Reset (button)
Administration tab>

Firmware Upgrade

File Path
Browse
Upgrade
Administration tab>

Reboot

Restart System
The status of the USB storage device: mount (file system
mounted and available) or unmount
Erases the voice mail messages that are stored on the USB
The file path to the firmware file that you want to install, as
selected by using the Browse button
Allows you to select a firmware file on your PC, and
File Path
populates the
Starts the Firmware upgrade, using the file that is specified
File Path
in the field
Restarts the SPA400
NOTE All SPA400 connections will be broken.
field
C
271