Managing Access To The Spa400 Configuration Utility - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Administering the SPA400 and Voice Mail Service
Managing Access to the SPA400 Web-Based Configuration Utility
Managing Access to the SPA400 Web-Based Configuration
Utility
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
SPA9000 Voice System Administration Guide
4. Save the configuration as Web Page Complete. The currently displayed page is
saved. You can use the saved file to review the settings as needed.
5. Repeat these steps for each page, as needed.
One log on can be established for access to the SPA400 web-based configuration
utility. The default username of Admin can be changed, and a password can be
entered.
Connect to the SPA400 administration web server. (See
SPA400 Administration Web Server," on
Click Administration tab > Management.
Proceed as needed:
•
Gateway Username: Type the desired username in this field, up to 32
characters.
•
Gateway Password: Type the password.
•
Retype to Confirm: Type the password again. Both entries must match exactly.
Click Save Settings.
To restart the SPA400, complete the following steps:
a. Click Administration tab > Reboot.
b. Click the Restart System button.
c. When the confirmation message appears, click OK. The SPA400 reboots.
page103.)
SPA400 Administration > Management
5
"Connecting to the
106