Sip Page - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Voice tab >

SIP Page

You can use the SIP page to enter many settings that are important for the proper
functioning of SIP on your SPA9000. This page includes the following sections:
•
"SIP Parameters section," on page 202
•
"SIP Timer Values (sec) section," on page 204
•
"Response Status Code Handling section," on page 206
•
"RTP Parameters section," on page 207
•
"SDP Payload Types section," on page 208
•
"NAT Support Parameters section," on page 210
•
"PBX Parameters section," on page 212
•
"Internal Music Source Parameters section," on page 216
•
"Auto Attendant Parameters section," on page 218
•
"PBX Phone Parameters section," on page 222
Voice tab > SIP page
SIP Parameters section
Max Forward
Max Redirection
Max Auth
SIP User Agent Name
SIP Max Forward value, which can range from 1 to 255.
Default: 70
Number of times an invite can be redirected to avoid an
infinite loop.
Default: 5
Maximum number of times (from 0 to 255) a request may be
challenged.
Default: 2
User-Agent header used in outbound requests. If empty, the
header is not included. Macro expansion of $A to $D
corresponding to GPP_A to GPP_D allowed.
Default: $VERSION
B
202