Supporting Direct Inward Dialing To Phone Extensions - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Configuring Phone Lines and Calling Routing Behavior
Managing Inbound Calls with the Contact List
SPA9000 Voice System Administration Guide
EXAMPLE SIP Header 1:
INVITE sip:4089993000@itsp1.com SIP/2.0
To: <sip:4089993003@itsp1.com>
Alternatively, the DID number can be indicated as a parameter in the TO header
with a configurable parameter name, such as didn.
EXAMPLE SIP Header 2:
INVITE sip:4089993000@itsp1.com SIP/2.0
To: <sip:4089993000@itsp1.com>;didn=4089993003
You can identify the field to use for the DID number and the parameter name on the
Voice > SIP page, PBX Parameters section, SIP DIDN and SIP DIDN Param
Name fields. For the first example above, these two fields are ignored; for the
second example, SIP DIDN is set to TO Param and SIP DIDN Param Name is set to
didn.
The Contact List is used to route the calls to a client station based on DID numbers
that are embedded in the INVITE message.
EXAMPLE Contact List Rule:
4089993000:aa|4089993001:3001|4089993002:3002|...|4089993009:3
009
An incoming call to the main number is answered by the Auto-Attendant, while
calls to the other nine DID numbers are routed to dedicated private extensions.

Supporting Direct Inward Dialing to Phone Extensions

Direct Inward Dialing allows the external users to dial directly any phone extension
in the SPA9000 Voice System, without passing through the Auto Attendant or the
receptionist.
Before proceeding with the configuration you need to have the full
correspondence between the external (DID) number and the extension number.
Table 1, "DID-to-Extension Mapping Example," on page 89
4
provides an example.
88