Digit Sequence Examples - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Configuring Phone Lines and Calling Routing Behavior
Configuring Dial Plans
SPA9000 Voice System Administration Guide
Digit Sequence
,
(comma)
!
(exclamation point)
*xx
S0 or L0

Digit Sequence Examples

The following examples show digit sequences that you can enter in a dial plan.
In a complete dial plan entry, sequences are separated by a pipe character (| ) , and
the entire set of sequences is enclosed within parentheses.
EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8,
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! |
9, 011xxxxxx. | 0 | [49]11 )
•
Extensions on your system
EXAMPLE: (
[1-8]xx
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx !
| 9, 011xxxxxx. | 0 | [49]11 )
Allows a user dial any three-digit number that starts with the digits 1
[1-8]xx
through 8. If your system uses four-digit extensions, you would instead enter
the following string:
Function
Enter a comma between digits to play an "outside
line" dial tone after a user-entered sequence.
EXAMPLE: 9, 1xxxxxxxxxx
An "outside line" dial tone is sounded after the
user presses 9, and the tone continues until the
user presses 1.
Enter an exclamation point to prohibit a dial
sequence pattern.
EXAMPLE: 1900xxxxxxx!
The system rejects any 11-digit sequence that
begins with 1900.
Enter an asterisk to allow the user to enter a 2-
digit star code.
Enter S0 to reduce the short inter-digit timer to 0
seconds, or enter L0 to reduce the long inter-digit
timer to 0 seconds.
| 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8,
[1-8]xxx
4
68