Configuring Outbound Call Codec Selection Codes - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Advanced Topics in SPA9000 Administration
Advanced Call Control and Routing
STEP 5
STEP 6
STEP 7
STEP 1
STEP 2
STEP 3
SPA9000 Voice System Administration Guide
In the Group 1 Line field, or other desired Group Line field, enter the line interfaces
in the order of preference. For more information, see
Preference," on page176.
As you make your entries, read the field labels to distinguish between the
NOTE
fields for Group 1 User ID ... Group 4 User ID and Group 1 Line ... Group 4
Line.
Click Submit All Changes.
To verify your progress, place a call to a phone that has caller ID, and confirm that
the expected number appears.

Configuring Outbound Call Codec Selection Codes

A user can enter a code selection code before dialing a number, to choose the
preferred codec for the associated call.The SPA9000 Voice System is pre-
configured with default codec selection codes, but you can customize them for
your site. The codes are automatically appended to the dial plan.
To select a specific codec per call, the phone user enters the code before entering
the telephone number.
Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. (See
Server," on page 27).
Click Voice tab > Regional.
Scroll down to the Outbound Call Codec Selection Codes section.
SPA9000 Voice > Regional: Outbound Call Codec Selection Codes
"Connecting to the SPA9000 Administration Web
"Call Routing Group Line
A
177