Localizing The Spa400 Caller Id Method - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Localization

Localizing the SPA400 Caller ID Method

STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
Localizing the SPA400 Caller ID Method
STEP 1
STEP 2
STEP 3
SPA9000 Voice System Administration Guide
Click Save Settings.
On the menu, click Setup > Voice.
Scroll down to the Tear Down FXO Port field, and enter 0. Refer to the following
illustration.
SPA400 Setup tab > Voice page: Line Settings section
Click Save Settings.
To restart the SPA400, complete the following steps:
a. Click Administration > Reboot.
b. Click the Restart System button.
c. When the confirmation message appears, click OK. The SPA400 reboots.
Reboot OK
d. When the
You need to identify the caller ID method to use in your country.
Click Setup tab > Voice.
Line Settings
Scroll down to the
Caller Id and CP Tone Method
From the
. Go to Setup page? message appears, click OK.
section.
drop-down list, choose your region.
SPA400 Setup tab > Voice page
8
163