How To Access The Web-Based Utility; The Setup - Basic Setup Tab; Figure 6-1: Login Screen; Figure 6-2: Basic Setup - Cisco Linksys AG310 User Manual

ADSL2+ Gateway with VoIP
• Reboot. If you need to do a hard or soft reboot of the Gateway, use this screen.
Status
• Gateway. This screen provides status information about the Gateway.
• Local Network. This provides status information about the local network.

Figure 6-1: Login Screen

• DSL Connection. This screen provides status information about the DSL connection.

How to Access the Web-Based Utility

To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the Gateway's default
IP address, 192.168.1.1, in the Address field. Then press Enter.
A login screen will appear (Windows XP users will see a similar screen). Enter admin (the default user name) in
the User Name field, and enter admin (the default password) in the Password field. Then click the OK button.

The Setup - Basic Setup Tab

The first screen that appears is the Basic Setup tab. This tab allows you to change the Gateway's general
settings. Change these settings as described here and click the Save Settings button to save your changes, or
click the Cancel Changes button to cancel your changes.
Internet Setup
PVC Connection. If your ADSL account provides multiple permanent virtual circuits (PVCs), use this control to
specify the one you will configure. The Gateway can handle up to eight PVCs. They may be used to carry different
services or connect to different networks. Each PVC is identified by a unique combination of VCI and VPI numbers
(see "Virtual Circuit," below).
Internet Connection Type. The Gateway supports six Encapsulation methods: RFC 1483 Bridged, RFC 1483
Routed, IPoA, RFC 2516 PPPoE, RFC 2364 PPPoA, and Bridge Mode Only. Select the appropriate type of
encapsulation from the drop-down menu. Each Basic Setup screen and available features will differ depending
on what type of encapsulation you select.
NOTE: For New Zealand residents, please refer to the Note under RFC 2364 PPPoA.

Figure 6-2: Basic Setup

Chapter 6: Configuring the ADSL2+ Gateway 16
How to Access the Web-Based Utility