Nat Support Parameters Section - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
G726r24 Codec Name
G726r32 Codec Name
G726r40 Codec Name
G729a Codec Name
G729b Codec Name
G723 Codec Name
EncapRTP Codec Name
Voice tab > SIP page

NAT Support Parameters section

Handle VIA received
Handle VIA rport
Insert VIA received
G.726-24 codec name used in SDP.
Default: G.726-24
G.726-32 codec name used in SDP.
Default: G.726-32
G.726-40 codec name used in SDP.
Default: G.726-40
G.729a codec name used in SDP.
Default: G.729a
G.729b codec name used in SDP.
Default: G.729ab
G.723 codec name used in SDP.
Default: G.723
EncapRTP codec name used in SDP.
Default: encaprtp
If you select yes, the SPA9000 processes the received
parameter in the VIA header (this value is inserted by the
server in a response to any one of its requests). If you select
no, the parameter is ignored. Select yes or no from the drop-
down menu.
Default: no
If you select yes, the SPA9000 processes the rport
parameter in the VIA header (this value is inserted by the
server in a response to any one of its requests). If you select
no, the parameter is ignored. Select yes or no from the drop-
down menu.
Default: no
Inserts the received parameter into the VIA header of SIP
responses if the received-from IP and VIA sent-by IP values
differ. Select yes or no from the drop-down menu.
Default: no
B
210