Vertical Service Activation Codes Section - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA9000 Field Reference
Voice tab
NOTE
SPA9000 Voice System Administration Guide
CPC Duration
Voice tab > Regional page

Vertical Service Activation Codes section

Vertical Service Activation Codes are automatically appended to the dial-plan.
There is no need to include them in dial-plan, although no harm is done if they are
included.
Call Return Code
Call Redial Code
Blind Transfer Code
Call Back Act Code
Call Back Deact Code
Call Back Busy Act Code
Cfwd All Act Code
Cfwd All Deact Code
Cfwd Busy Act Code
Duration in seconds for which the tip-to-ring voltage is
removed after the caller hangs up. After that, tip-to-ring
voltage is restored and dial tone applies if the attached
equipment is still off-hook. CPC is disabled if this value is set
to 0. Range: 0 to 1.000 second. Resolution is 0.001 second.
Default: 0 (CPC disabled)
This code calls the last caller.
Default: *69
Redials the last number called.
Default: *07
Begins a blind transfer of the current call to the extension
specified after the activation code.
Default: *98
Starts a callback when the last outbound call is not busy.
Default: *66
Cancels a callback.
Default: *86
Starts a callback when the last outbound call is busy.
Default: *05
Forwards all calls to the extension specified after the
activation code.
Default: *72
Cancels call forwarding of all calls.
Default: *73
Forwards busy calls to the extension specified after the
activation code.
Default: *90
B
231