Provisioning Page; Regional Page - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Voice tab>

Provisioning page

This page is available for service provider use only. Information is available in the
Linksys Provisioning Guide, which is available only to service providers who are
registered with Linksys.
Voice tab >

Regional page

You can use the Regional page to customize the tones and ring patterns, vertical
service activation codes (star codes) and announcement codes, codec selection
codes, and other regional settings such as time zone. This page includes the
following sections:
•
"Call Progress Tones section," on page 224
•
"Distinctive Ring Patterns section," on page 226
•
"Distinctive Call Waiting Tone Patterns section," on page 227
•
"Distinctive Ring/CWT Pattern Names section," on page 228
•
"Ring and Call Waiting Tone Spec section," on page 229
•
"Control Timer Values (sec) section," on page 229
•
"Vertical Service Activation Codes section," on page 231
•
"Vertical Service Announcement Codes section," on page 236
•
"Outbound Call Codec Selection Codes section," on page 236
•
"Miscellaneous section," on page 237
Voice tab > Regional page
Call Progress Tones section
Dial Tone Prompts the user to enter a phone number. Reorder Tone is
played automatically when <Dial Tone> or any of its
alternatives times out.
Default: 350@-19,440@-19;10(*/0/1+2)
B
224