System Status Section - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Client Certificate
Customization
Licenses
Voice tab > Info page >

System Status section

Current Time
Elapsed Time
Voice tab > Info page >
FXS 1/2 Status section
Hook State
Message Waiting
Call Back Active
Last Called Number
Last Caller Number
Call 1/2 State
Call 1/2 Tone
Call 1/2 Encoder
The status of the client certificate, which authenticates the
SPA9000 for use in the ITSP network
For an remote configuration (RC) unit, this field indicates
whether the unit has been customized or not. Pending
indicates a new RC unit that is ready for provisioning. If the
unit has already retrieved its customized profile, this field
displays the name of the company that provisioned the unit.
When populated with the value K0, indicates that the
SPA9000 is licensed for up to 16 users; if this field is blank,
install firmware version 5.2.5 or higher.
The current date and time of the system; for example, 10/3/
2003 16:43:00
The total time elapsed since the last reboot of the system; for
example, 25 days and 18:12:36
The readiness of the device that is connected to the
corresponding Phone port on the SPA9000
•
On: Ready for use
•
Off: In use
Indicates whether the station assigned to the FXS port has
new voicemail waiting: Yes or No
Indicates whether a call back request is in progress: Yes or
No
Last number called
Number of the last caller if available from caller ID, example
4085551212
Status of the call:, Ringing, Idle, or Connected
Type of tone used by the call, for example Ring Back 2 for
inbound call or None for outbound call
Codec used for encoding
B
198