Local Time Configuration; Configuring The Spa9000 And Spa9Xx Call Progress Tones - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Localization

Local Time Configuration

Local Time Configuration

Configuring the SPA9000 and SPA9xx Call Progress Tones

STEP 1
SPA9000 Voice System Administration Guide
You will need to localize the date, time, and daylight saving time rule. See
the Date and Time," on page 30
page 31. Use the following table to find the correct Daylight Saving Time Rules for
EMEA and Australia.
Table 1 SPA9000 Daylight Saving Time Rules
Country
Australia (ACST)
Australia (AEST)
Australia (AWST)
France
Germany
Spain
UK/Ireland
Call progress tones, such as dial tone and reorder, indicate the call progress to the
users. You can configure your SPA9000 and your SPA9xx phones to use the
appropriate call progress tones for your region.
Localize the tones for the SPA9000:
a. Start Internet Explorer, and then enter the IP address of the SPA9000. Click
Admin Login and then click Advanced.
b. Click Voice tab > Regional.
Call Progress Tones
c. In the
corresponding fields.
d. Click Submit All Changes.
and "Configuring Daylight Saving Time," on
Daylight Saving Time Rule
start=4/1/7/3;end=10/1/7/2;save=-1
start=4/1/7/3;end=10/1/7/2;save=-1
start=3/-1/7/3;end=10/-1/7/2;save=¬1
start=3/-1/7/2;end=10/-1/7/2;save=1
start=3/-1/7/2;end=10/-1/7/2;save=1
start=3/-1/7/2;end=10/-1/7/2;save=1
start=3/-1/7/2;end=10/-1/7/2;save=1
section, enter the values from Table 3-1 into the
8
"Setting
Time Zone
GMT+10:30
GMT+11
GMT+09:00
GMT+1
GMT+1
GMT+1
GMT
154