Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 265

SPA400 Field Reference
Setup
SPA9000 Voice System Administration Guide
SPA 9000 Address
Discover Automatically
Static Address
IP Address
Port
Port ID
Port ID 1
Port ID 2
Port ID 3
Port ID 4
Signaling
Signaling Port
RTP
RTP Port
Select this radio button if you want the SPA400 to learn the
SPA9000 IP address and port number from the SIP
registration packet. (Recommended)
Select this radio button to enter the IP address of SPA9000.
Specify the IP Address and Port in the provided fields.
IP address of the SPA9000
UDP port number that the SPA9000 uses to register to the
SPA400
Default: 5060
A unique ID for the Line 1 port, too allow the SPA9000 to
identify incoming calls from the PSTN
Default: FXO_Port_ID_1
A unique ID for the Line 2 port, too allow the SPA9000 to
identify incoming calls from the PSTN
Default: FXO_Port_ID_2
A unique ID for the Line 3 port, too allow the SPA9000 to
identify incoming calls from the PSTN
Default: FXO_Port_ID_3
A unique ID for the Line 4 port, too allow the SPA9000 to
identify incoming calls from the PSTN
Default: FXO_Port_ID_4
The UDP port that the SPA400 uses to listen for incoming
call setup requests
Default: 5060
The base UDP port for the block of UDP ports that that the
SPA400 uses to send and receive RTP and RTCP packets
Default: 10000
C
263