Intellijel Metropolix Manual page 198

● NEW : Added a three-option LOAD DELAY setting to the
longer uses the LEN>Pulses parameter of track 1 to determine when to load the next preset.
Instead, it now uses the LOAD DELAY setting to define when, exactly, a preset loads. You can
now select whether a preset load is Instant; determined by some number of Queue Pulses (or
manually triggered); or determined by the new Total Pulses setting. These new methodologies
are described thoroughly in the
● NEW: CTRL knob positions can now be output as voltage on OUTS A and B, and can function
either as a unipolar voltage source (0-5V) or bipolar (±5V). For more information see the
description for OUT A &
● CHANGE: The maximum number of Queue Pulses has been increased from 64 to 4096 (to
match the maximum number of pulses available via the new Total Pulses setting).
● CHANGE: On the DIV
accurate name of "Pulse Count Div". However, due to space constraints, it's still called "Pulse Div"
on the MOD, AUX and CTRL assignment screens.
● CHANGE: When selecting MOD Lanes, each lane's assigned destination is now shown in the
action display at the bottom of the screen (along with the MOD Lane number, which was
previously shown).
● CHANGE: When accessing shortcuts on the SCALE and ORDER screens, the Action Display
now says "User Shortcut" rather than simply "Shortcut". This reminds you that the shortcuts on
these two screens are user-programmable.
● CHANGE: Minimum tempo is now 0.1 BPM (instead of 1.0 BPM).
● FIX: General memory optimizations and minor bug fixes.
LOAD section of the manual.
B.
screen, the old Pulse Div parameter has been given the slightly more
Metropolix Manual
LOAD screen. Queued loading no
197