Intellijel Metropolix Manual page 172

PRESET CHAIN Screen Overview
The appearance of the PRESET CHAIN Screen changes depending on whether or not a chain
exists, what's in the chain, what's selected, and whether or not the chain is currently enabled or
disabled. That said, the basic elements that appear on most chains are detailed below:
Link Num
Preset
Repeats
In this column, each numbered line represents a link in the Preset Chain. A
Preset Chain has a maximum length of 32 links (though each preset in that
chain can repeat as many as 64 times before advancing to the next preset).
This column defines/displays the preset that's loaded with each link. As
discussed in the SAVE
bank color (Red, Orange, Yellow, Green, Cyan, Blue, Magenta, and Pink)
and Stage button (1 - 8), and are displayed here accordingly. Chained
presets load in accordance with the
options (i.e. "Pitch Load", "Switch Load" and "Ctrl Load").
This column defines/displays the number of times the particular preset
repeats playback before moving to the next preset in the chain.
Note that the length of time for which each preset plays is determined by its
Total Pulses value (as set per-preset on the
the number of pulses set there will determine the length of 1x playback. So
if a preset's Total Pulses = 32 and Repeat = 1x, the link plays for 32 pulses
before moving to the next link. If Repeat = 4x, then the link plays for 128
pulses (32 x 4) before advancing to the next link.
If a preset's Total Pulses = "—", then the link's length is instead determined
by the Queue Pulses parameter (also set on the
Pulses = "—", then the chain plays the preset continuously, without
advancing to the next link. Manually resetting Metropolix (using either the
Metropolix Manual
section of the manual, saved presets are named by
SETUP menu's "Presets Setup..."
SETUP screen). Specifically,
SETUP screen). If Queue
171