Intellijel Metropolix Manual page 150

Accum Polar This is a tri-state parameter, with the knob controlling three different
states, depending on its position:
Clockwise: Any stages for which the ACCUM function is active will
accumulate as programmed, and the LIM screen's Polarity setting will be
set to Unipolar.
Noon (straight up): Any stages for which the ACCUM function is active
accumulate as programmed, and the LIM screen's Polarity setting will be
set to Bipolar.
Counterclockwise: Any stages for which an
invert the TRANSPOSE AMOUNT direction — positive accumulations will
become negative; and vice versa. It will also set the LIM screen's Polarity
setting to Unipolar.
NOTE: When this function is assigned to a CTRL knob, it overtakes the
ability to set Polarity on the LIM screen, greying out the Polarity option.
BPM (INT) If Metropolix' Clock is set to 'Internal' (in the
the knob directly changes the BPM screen's value from 0.1 BPM (when
fully counterclockwise), to 400 BPM (when fully clockwise).
Clock Div In Turning the knob directly changes the DIV screen's CLOCK DIV value on
the destination track(s).
Direction ± Turning the knob clockwise from the noon position causes the sequence
to play in the forward direction. Turning the knob counterclockwise from
the noon position causes the sequence to play in the reverse direction.
Metropolix Manual
ACCUM value is assigned will
SETUP menu), then turning
149