Intellijel Metropolix Manual page 54

Receive Any...
SETUP > ADVANCED Options
Presets Setup... Opens a submenu of options related to Preset loading, including when Presets load, and
exactly what type of data is loaded (or ignored) when a Preset Loads. To exit the
submenu, press the EXIT button.
The options are:
FUNCTION
Queue Pulses
Pitch Load
FILLED : Transmits only those Presets for which data has
been stored.
1 - 8 : Sends only the 8 presets associated with the
selected bank.
Readies Metropolix to receive SysEx. Screen flashes
"Ready", indicating you must initiate a transfer from an
external device. Flashing stops once messages are
received, and the bottom of the screen indicates receipt of
SysEx messages.
OPTIONS DESCRIPTION
Metropolix presets can be loaded instantaneously, or
delayed (queued) until a user-specified number of
queued pulses passes, or a manual RESET is triggered.
The Queue Pulses setting applies only if the Action
parameter is set to 'Queued Load' on the
screen, and the currently playing sequence's Pulses
value is set to 'Auto' on the LEN screen.
— If set to '—', any queued preset loads occur only when
Metropolix is RESET manually (via the RESET button or
a properly configured RESET input jack). Without a reset
signal, the patch will never load (until the sequencer is
stopped).
1-4096 This sets the number of pulses that must pass before a
queued preset loads (without triggering a manual reset).
Off Loading a preset does not load the pitch slider values
that are saved with it. Instead, the pitch slider positions
always represent the actual pitch being played, and the
loaded sequence uses the existing slider positions to
determine pitch. This is ideal for those who wish to take
full advantage of Metropolix' hands-on, jam-oriented
approach to sequencing. This is the factory default
setting.
Thru Loading a preset also loads the pitch values that were
saved with the preset — overriding their current position
as set on the front panel. Additionally, this option will
only override the stored pitch value when the slider
moves through a position that matches the stored pitch
value. This is ideal for those who want to load a saved
Metropolix Manual
LOAD Preset
53