Intellijel Metropolix Manual page 103

CV
Press EDIT + CV to access the per-stage CV Lane. This is a per-track sequencer "lane" that
generates an additional control voltage on each stage. You can control external gear by sending the
CV lane out one of Metropolix's two assignable outputs (A or B), as described in
To edit a Stage's CV value, press the Stage button corresponding to the Stage you wish to edit.
The CV Lane screen functions differently depending on the type of CV it contains, and this is
chosen by pressing the ALT + TYPE (Stage 8) buttons to access the CV TYPE screen (described in
TYPE), later in the manual), and selecting a CV TYPE of either 'CV Value' or
TYPE (CV
'Gate Toggle.'
Briefly:
The following two sections will describe how to program a CV lane, depending on whether
CV Type = CV Value or
When CV TYPE = CV Value, the CV Stage Editing
screen looks like this..
When CV TYPE = Gate Toggle, the CV Stage Editing
screen looks like this.
CV Type = Gate Toggle
Metropolix Manual
is selected.
OUT A & B.
102