Intellijel Metropolix Manual page 175

Quick Chain Creation
Metropolix offers an additional "Quick Chain" technique for creating a Preset Chain.
To create a Quick Chain:
1. If you're not already on the
screen appears.
2. Once on the PRESET CHAIN screen, press and hold down on the SETUP button
The SETUP button must be held down throughout the entire Quick Chain creation process that
follows.
3. In Quick Chain, you must first define a link's mute state (if needed), so press the TRK 1, TRK 2,
or MOD buttons to toggle their mute states for the current link.
4. While continuing to hold the SETUP button, turn the encoder to select the desired Preset Bank
colour.
5. While continuing to hold the SETUP button, press one of the eight stage buttons to select which
preset number to assign to the link.
A new Preset Chain link is made, and the cursor moves to the next link in the chain. However, a
"+" symbol remains next to the previous link's Repeat value, indicating you can still increase the
number of times the link repeats.
6. If you want the previous link to repeat, simply press the same stage button again. Each time you
press the stage button, the link's repeat count will advance by one.
7. Select a different Preset or mute state, and a new link will be added to the Preset Chain.
8. When you're finished creating your chain, simply release the SETUP button.
Chain Mode will automatically become enabled, and you can play back your chain by pressing
the RUN button.
NOTE: If you don't want Quick Chain to automatically enable the Preset Chain for playback, press
the EXIT button before you release the SETUP button (in Step 7, above).
PRESET CHAIN screen, press and hold the SETUP button until the
Metropolix Manual 174