Intellijel Metropolix Manual page 164

COPY & PASTE
You can copy and paste
from one place to another. To do so:
Stage Copy:
1. Press the desired Track button (TRK 1 or TRK 2), and navigate to the per-Stage function you
wish to copy.
For example, if you wish to copy one of TRK 1's PROB stages to another, you would hold EDIT
and press the PROB button.
2. Hold down the Stage # button (1 - 8) corresponding to the Stage number you wish to copy
from.
The Action Display at the bottom of the screen will say "Copy Stage <n>", where <n> is the
Stage number you're currently holding down.
3. While continuing to hold down the "copy from" Stage button, press the Stage # button (1 - 8)
corresponding to the Stage number you wish to paste it to.
The screen flashes a message to confirm the copied stage has been pasted.
You can copy one stage to more than one stage by continuing to hold the "Copy From" stage
while pressing different Stage destination buttons.
NOTE: This same technique works for copying individual stages within a MOD Lane.
Track Settings Copy:
1. Press the Track Settings button (i.e., ORDER, LEN, etc.) corresponding to the settings you wish
to copy.
For example, if you wish to copy TRK 1's DIV setting to TRK 2, you would press the DIV button
to tell Metropolix what parameters you'll be copying.
2. Hold down the Track button (TRK 1 or TRK 2) corresponding to the Track whose settings you
wish to copy from.
The Action Display at the bottom of the screen will say "Copy Track <n>", where <n> is the
Track number you're currently holding down.
3. While continuing to hold down the "copy from" Track button, press the Track button (TRK 1 or
TRK 2) corresponding to the Track you wish to paste those settings to.
The screen flashes a message to confirm the copied Track settings have been pasted.
Stage Buttons, Track Parameters,
Metropolix Manual
MOD Lanes, and/or Track Menu settings
163