Intellijel Metropolix Manual page 189

FACTORY RESET
To restore Metropolix to its default factory configuration:
1. Press the SETUP button to open the global SETUP MENU.
2. Turn the encoder until the FW Version number is highlighted.
3. Hold down the MOD button while pressing the encoder.
Metropolix enters Factory Mode and displays the
Turn the encoder to highlight the Factory Reset option, then press the encoder.
4.
Metropolix' global, track, and stage parameters are all reset, along with the CTRL knob, AUX
input, OUT and MOD assignments, custom shortcuts, etc.
NOTE: Alternatively, you can perform a Factory Reset by turning off power to the Metropolix
then hold the SETUP button down while powering the unit back on.
Performing a Factory Reset will not overwrite your presets. If you wish to erase all your
presets:
1. Turn off power to the Metropolix.
2. Press and hold the Stage 2 (SAVE) button while turning on the power.
All presets are erased.
Factory Menu.
Metropolix Manual 188