Intellijel Metropolix Manual page 153

Slider Range Turning the knob directly changes the octave range of the PITCH
SLIDERS (as normally set by the Slider Octaves setting in the TRACK
MENU.
Stages Len Turning the knob directly changes the LEN screen's STAGES value on the
destination track(s).
Stages Offset Turning the knob directly changes the stage offset on the destination
track(s).
Swing Turning the knob directly changes the SWING screen's SWING value.
Trk Out Swap ± Turning the knob clockwise from the noon position swaps the Track
output assignment jacks, such that TRK 1's PITCH and GATE outputs are
routed to TRK 2's PITCH and GATE outputs, and vice-versa. Similarly, if
tracks are sending data to either OUT A or OUT B they, too, will swap
assignments. This enables you to create elaborate sequence variations
and rhythms that can extend beyond the various permutations available
with the 8 stages. Turning the knob counterclockwise from the noon
position causes the TRK 1 and TRK 2 output assignments to appear at
their designated output jacks.
Velocity ± Turning the knob clockwise from the noon position increases a track's
velocity voltage — adding to the velocity value set with the Velocity
parameter in the
the noon position decreases a track's velocity voltage.
NOTE: In order to hear the effect, you must be transmitting Velocity to
OUT A or
Track Menu. Turning the knob counter-clockwise from
B, or over MIDI.
Metropolix Manual 152