Universal Robots UR16e PolyScope X User Manual page 118

13. Transportation
Description Only transport the robot in its original packaging. Save the packaging material in a dry
place if you want to move the robot later.
When moving the robot from its packaging to the installation space, hold both tubes of the
robot arm at the same time. Hold the robot in place until all mounting bolts are securely
tightened at the base of the robot.
Lift the Control Box by its handle.
Disclaimer Universal Robots cannot be held responsible for any damage caused by transportation of
the equipment.
See the recommendations for transportation without packaging at:
robots.com/manuals
UR16e PolyScope X
WARNING
Incorrect lifting techniques, or using improper lifting equipment, can lead to
injury.
•
Avoid overloading your back or other body parts when lifting the
equipment.
•
Use proper lifting equipment.
•
All regional and national lifting guidelines shall be followed.
•
Make sure to mount the robot according to the instructions in Mechanical
Interface.
NOTICE
If the robot is transported as an assembled application with any external
equipment, the following applies:
•
Transporting the robot without its original packaging will void all warranties
from Universal Robots A/S.
•
If the robot is transported attached to a 3rd-party application / installation,
follow the recommendations for transporting the robot without the original
transport packaging.
120
13. Transportation
universal-
User Manual