Install Cam License - Cisco NAC3350-PROF-K9 - NAC Profiler Server Installation Manual

Chapter 3 Installing the Clean Access Manager and Clean Access Server
Figure 3-1

Install CAM License

Browse to the license file you received in the Clean Access Manager License File field and click the
Step 5
Install License button.
To enter a license in the Clean Access Manager License File field, click the Browse button to locate
Step 6
the license file you received for the CAM and click the Install License button.
If you have purchased a CAM Failover (HA) license, install the Failover license to the Primary CAM
Note
first, then load all the other licenses. This facilitates upgrading CAM HA-pairs.
Once the license is accepted, the customizable CAM Pre-login Banner
Step 7
chosen to enable Pre-login Banners during your initial CAM configuration) or the web admin console
login window appears
Login.
OL-20326-01
Clean Access Manager License Form
(Figure 3-3). Type the username admin and web admin user password, and click
Installing the Clean Access Manager
(Figure
Cisco NAC Appliance Hardware Installation Guide
3-2) appears (if you have
3-13