Cisco NAC3350-PROF-K9 - NAC Profiler Server Installation Manual page 84

Installing the Clean Access Manager
Figure 3-2
The Pre-login Banner enables you to present a broad range of messages, including warnings,
system/network status, access requirements, etc., to administrator users before they enter authentication
credentials in the CAM/CAS. Administrators can specify the text of the Pre-login Banner by enabling
this feature on the appliance, logging into the command-line console, and editing the /root/banner.pre
file. The text of the Pre-login Banner appears in both the web console interface and the command-line
interface when admin users are logging into the CAM/CAS.
You can enable or disable the Pre-login Banner during the initial CAM/CAS configuration CLI session
and whenever you choose to alter your base CAM/CAS configuration with the
CLI command.
Figure 3-3
The Monitoring > Summary page and left-hand navigation pane appears
Step 8
Type the username admin and web console admin password you specified during installation and initial
Step 9
configuration, and click Login.
Cisco NAC Appliance Hardware Installation Guide
3-14
Chapter 3
CAM Prelogin Banner Example
CAM Administrator Web Console Login Page
Installing the Clean Access Manager and Clean Access Server
service perfigo config
(Figure 3-4).
OL-20326-01