Cisco NAC3350-PROF-K9 - NAC Profiler Server Installation Manual page 82

Installing the Clean Access Manager
You must already have obtained a product or evaluation license to access the CAM/CAS and CAM web
Warning
console. Refer to
step-by-step instructions on how to obtain and install product licenses and obtain service contract
support for Cisco NAC Appliance.
Launch a web browser from a computer accessible to the CAM by network.
Step 1
If you are using Internet Explorer Version 6 to access the CAM (and CAS) web console, ensure you have
Step 2
enabled TLS version 1 in the browser Advanced settings. For details, see
Explorer Version 6, page
Step 3 In the URL/address field, type the IP address of the CAM (or the host name if you have made the
required entry in your DNS server).
If using a temporary SSL certificate, the security alert appears and you are prompted to accept the
Step 4
certificate. Click Yes to accept the certificate. (If using signed certificates, security dialogs do not
appear.)
The Clean Access Manager License Form
FlexLM license file. For reference, the top of the form displays the CAM's eth0 MAC address. You will
need to obtain and save your product license files to disk on the PC/laptop from which you are accessing
the CAM web console. See
to obtain product and evaluation licenses.
Note To aid in license requests, the top of the form displays the CAM's eth0 MAC address.
Cisco NAC Appliance Hardware Installation Guide
3-12
Chapter 3
Cisco NAC Appliance Service Contract / Licensing Support
3-49.
Cisco NAC Appliance Service Contract/Licensing Support
Installing the Clean Access Manager and Clean Access Server
(Figure 3-1) appears and prompts you to install your CAM
for complete
Enabling TLSv1 on Internet
for details on how
OL-20326-01