Overview - Cisco NAC3350-PROF-K9 - NAC Profiler Server Installation Manual

Installing the Clean Access Manager and Clean
Access Server
This chapter covers the following topics:
•
•
•
•
•
•
•
•
•
•
•

Overview

This chapter provides installation instructions for Cisco NAC Appliance. It provides instructions for
how to initially configure your CAM and CAS using the Configuration Utility, access the CAM web
console, and install product licenses. Once the initial configuration of your CAM and CAS is complete,
you will be able to access the CAM web console to continue the rest of the configuration for your
deployment.
For comprehensive configuration information, refer to the latest
Manager Configuration Guide, Release 4.8(3)
Configuration Guide, Release 4.8(3)
http://www.cisco.com/en/US/products/ps6128/products_installation_and_configuration_guides_list.ht
ml.
version running on your Cisco NAC Appliance (e.g. "Release 4.8").
OL-20326-01
Overview, page 3-1
Installing the Clean Access Manager, page 3-2
Installing the Clean Access Server, page 3-18
Cisco NAC Appliance Connectivity Across a Firewall, page 3-34
Connectivity Across a Wide Area Network, page 3-37
Configuring Additional NIC Cards, page 3-37
Serial Connection to the CAM and CAS, page 3-39
Useful CLI Commands for the CAM/CAS, page 3-42
Manually Restarting the CAM/CAS Configuration Utility, page 3-46
Troubleshooting the Installation, page 3-47
Powering Down the NAC Appliance, page 3-50
When using the online publications, make sure to refer to the documents that match the software
C H A P T E R
and Cisco NAC Appliance - Clean Access Server
documents available on Cisco.com under
Cisco NAC Appliance Hardware Installation Guide
3
Cisco NAC Appliance - Clean Access
3-1