Table of Contents
Advertisement
Rack-Mounting Your Cisco NAC Appliance CAM/CAS
Figure 2-5
1
Adjustment tab
2
Release tab
Step 6
Align the pins (see
adjusted the rail length, push the rail-locking carrier back toward the rear of the slide rail to align the
slide rail with the mounting flange. Then, press the tab to secure the front of the slide rail to the front
mounting flange.
Note
Repeat the steps from
Step 7
Cisco NAC Appliance Hardware Installation Guide
2-18
Adjusting the Slide-rail Length
Figure
2-6) on the front rail-locking carrier to the front mounting flange. If you have
Ensure that the pins are fully extended through the mounting flange and the slide rail.
1
to
6
for the other slide rail.
3
Pins not extended through the
mounting flange and slide rail
4
Pins extended through the mounting
flange and slide rail
Chapter 2
Preparing for Installation
OL-20326-01
Hide quick links:
Advertisement
Table of Contents
