Installing The Nac-3315 Appliance Into The Slide Rails - Cisco NAC3350-PROF-K9 - NAC Profiler Server Installation Manual

Chapter 2 Preparing for Installation
Figure 2-6
1
2
3

Installing the NAC-3315 Appliance into the Slide Rails

To install the NAC-3315 appliance in the slide rails:
Align the CAM/CAS on the slide rails and push the CAM/CAS fully into the rack cabinet.
Step 1
Secure the CAM/CAS to the front mounting flanges with the captive thumbscrews (see
Step 2
Note
OL-20326-01
Aligning the Slide Rail with the Mounting Flange
Adjustment tab
Mounting flange
Pins
You must leave the shipping brackets attached to the slide rails unless the shipping brackets
impede the CAM/CAS from sliding fully in the rack cabinet. If you need to remove the shipping
brackets, see Step 3.
Rack-Mounting Your Cisco NAC Appliance CAM/CAS
4 Pins extended through the mounting
flange and slide rail
5 Pins not extended through the
mounting flange and slide rail
Cisco NAC Appliance Hardware Installation Guide
Figure 2-7).
2-19